To protect your lustrous hardwood floor and preserve its gleaming beauty, there are a few things you need to do. But whether it’s using the right cleaning techniques or placing protective pads under furniture, each step of recommended maintenance is simple—and we’ll guide you.
Shaw Hardwood products, with their DuraShield:
For cleaning, make sure you...
- Use a damp cloth to blot spills and spots as soon as they happen. For tough spots, such as oil, paint, markers, lipstick, ink, tar, or cigarette marks, use acetone/nail polish remover on a clean white cloth, then wipe with a damp cloth. Always avoid allowing liquids to stand on your floor.
- Sweep, dust, or vacuum the floor regularly with the hard floor attachment (not the beater bar) to prevent accumulation of dirt or grit that can scratch or dull the floor finish.
- Occasionally wipe the floor with a damp mop or cloth.
- Periodically clean the floor with R2X Hard Surfaces Flooring Cleaner from Shaw's line of floor covering care products.
While cleaning is easy, there are a few things to avoid:
- Don't use oil based, wax, polish, or strong ammoniated or abrasive cleaners.
- Don't use steel wool or scouring powder.
- Don't wash or wet-mop the floor with soap, water, oil-soap detergent, or any other liquid cleaning material. This could cause swelling, warping, delamination, and joint-line separation, and void the warranty.
- Don't use any type of buffing machine.
Other routine care instructions:
- For spots such as candle wax or chewing gum, harden the spot with ice and then gently scrape with a plastic scraper, such as a credit card. Be careful not to scratch the flooring surface. Wipe clean with a damp cloth.
- For tough stains, use Shaw's R2X Hard Surfaces Flooring Cleaner.
- Do not use any type of buffing machine.